公司動態

聯系我們

conww.jpg

公司: 山東綿邈園林景觀工程有限公司

聯系人:于經理

手 機: 18354188859

地址:山東省濟南市高新區天辰路979號辦公樓1-101

公司動態

您的當前位置: 首頁>新聞動態>公司動態>玻璃鋼雕塑制作及上色流程

玻璃鋼雕塑制作及上色流程

發布日期: 2020-06-18 來源:http://www.nakagawakousan.com 點擊: 發布人:mianmao

玻璃鋼雕塑我們在各種廣場、公園等公共場所都是可以看見的,這種雕塑可以根據需求制作出不同的款式,每種款式的顏色,特點都是不一樣的么他們表達的含義也是不同的,玻璃鋼雕塑主要是有玻璃鋼制成,玻璃鋼有屬于復合材料的一種,其實制作工藝也是非常有難度的,下面小編就帶大家了解下關于玻璃鋼雕塑的制作方法及上色流程!

FRP sculptures can be seen in various public places such as squares and parks. This kind of sculpture can be made into different styles according to the needs. The colors and characteristics of each style are different. The meaning they express is also different. FRP sculptures are mainly made of FRP, which belongs to a kind of composite material. In fact, the production process is very good It's difficult. Let's learn about the production method and coloring process of FRP sculpture!
一、玻璃鋼雕塑的制作方法
1、 The manufacturing method of FRP sculpture
1、模具制作
1. Mold making
1)泥塑/泡沫雕塑:雕刻家根據甲方提供的圖紙進行雕刻,更終甲方確認雕塑是否需要修改直至完成。
1) clay sculpture / foam sculpture: the sculptor engraving according to the drawings provided by Party A. finally, Party A confirms whether the sculpture needs to be modified until it is completed.
木模:要求產品尺寸準確,模具大師雕刻,形狀,修改和驗證它與木材。我們稱之為模型,產品的外觀。
Wood mold: requires accurate product size, mold master to carve, shape, modify and verify it with wood. We call it the model, the appearance of the product.
2)石膏模應復制在粘土?;蚺菽I?,石膏模是一次性的,只能生產一兩種產品。
2) plaster mold should be copied on clay mold or foam mold, plaster mold is disposable, and can only produce one or two kinds of products.
3)玻璃鋼模具可直接復制在木模上,玻璃鋼模具可保存,使用壽命約100件。
3) The FRP mold can be directly copied on the wood mold, and the FRP mold can be permanently stored, with a service life of about 100 pieces.
2、空白
2. Blank
先用刷子將膠衣涂在模具表面,半干后鋪上纖維布;
First, apply the gel coat on the surface of the mold with a brush, and then lay the fiber cloth after it is half dry;
開始用刷子刷樹脂使其滲透,然后鋪布,逐層刷樹脂,達到所需厚度。
Start to brush the resin with a brush to make it penetrate, then spread the cloth and brush the resin layer by layer to reach the required thickness.
3、修模:脫模是指將坯料從模具中取出。
3. Mold repair: demoulding refers to taking the blank out of the mold.
4、制作玻璃鋼模具:石膏模制作的玻璃鋼制品經打磨修補后,復制成批生產。
4. Making FRP mould: the FRP products made of gypsum mould are copied and produced in batches after being polished and repaired.
5、噴油處理:
5. Fuel injection treatment:
1、首先用180×砂紙打磨產品,去除產品表面脫模蠟,用原子灰填充產品表面的針孔和夾緊線。
1. Firstly, 180 × sandpaper is used to polish the product, remove the demoulding wax on the product surface, and fill the pinholes and clamping lines on the product surface with atomic ash.
2、用220×砂紙打磨,噴道底漆,選擇不合格部位,加入原子灰。
2. Polish with 220 × sandpaper, spray the first primer, select unqualified parts, and add atomic ash.
3、用360×砂紙打磨,噴第二道底漆,再用細紅灰修補。
3. Polish with 360 × sandpaper, spray the second primer, and then repair with fine red ash.
4、用800×砂紙打磨,開始噴涂汽車漆干燥。
4. Use 800 × sandpaper to polish and start spraying automobile paint for drying.
5、表層干燥后,生產主管應檢查表層是否漏油,少噴;
5. After the surface layer is dry, the production supervisor shall check whether the surface layer leaks oil and spray less;
二、玻璃鋼雕塑上色流程
2、 Coloring process of FRP sculpture
1、剛制作完結的玻璃鋼雕塑表面有一層蠟,為了讓該雕塑更加的便利上色,就需求把上面的蠟打 磨掉,因此首要是運用砂紙打磨玻璃鋼雕塑表面。
1. There is a layer of wax on the surface of the finished FRP sculpture. In order to make the sculpture more convenient for coloring, it is necessary to polish the wax off the surface. Therefore, the first thing is to use sandpaper to polish the surface of the FRP sculpture.
2、剛制作完結的玻璃鋼雕塑有一些不平或許坑洞,因此,要先用油畫刮刀也可以湊合用,小 比較便利處置,大面積的就有些艱難了,不容易找平。
2. There are some unevenness or potholes in the glass fiber reinforced plastic sculpture just finished. Therefore, it is necessary to use the oil painting scraper first. The small center is more convenient to handle. The large area is a little difficult and not easy to level.
3、玻璃鋼雕塑的后期處置一方面是修整脫模后產品的部分缺點,更重要的是制作表面作用,常選用的表面作用是仿紫銅色與仿青銅色,關鍵是制造色漿。
3. On the one hand, the post-processing of FRP sculpture is to repair some defects of the products after demoulding, and more importantly, to make the surface effect. The commonly used surface effect is to imitate the copper color and bronze color, and the key is to make the color paste.

在線客服
分享
免费a片在线观看_欧美丰满熟妇xxxx性ppx_中文字幕无码日韩欧毛_国产精品综合av一区二区_国产欧美日韩一区二区搜索